Well Pump Pulling in Fredericksburg VA
Specialized Equipment for Deep Wells
Well pump pulling is the process of safely removing a submersible pump and the attached drop pipe from a residential well — sometimes from 100 to 600 feet down. Assure Plumbing & Septic provides full well pump pulling service throughout Fredericksburg, Spotsylvania, and the surrounding I-95 corridor. Many local plumbers refer this work out because they don't carry the equipment. We do, and we do it ourselves.
When Pump Pulling Is Required
Pump pulling is part of the job whenever a submersible pump has failed and needs to be inspected or replaced. It is also required for diagnostics when the cause of failure is unclear — for example, when the pump runs but produces no water, when amp draw is abnormal, or when the well is producing dirty water that points to a fouled intake. In many cases, pulling the pump is what reveals the actual problem.
What Our Pump Pulling Service Includes
- Site assessment and safe disconnection of electrical and plumbing connections
- Pump and drop-pipe extraction using mechanical pulling equipment
- Inspection of the pump, motor, wiring, check valve, and drop pipe
- Diagnosis of the failure cause with clear written documentation
- Repair or full replacement of the failed component
- Reinstallation, electrical reconnection, and pressure testing
- Disposal of the old pump when replacement is required
Why Pulling Equipment Matters
A submersible well pump combined with several hundred feet of drop pipe and water is heavy — often hundreds of pounds. Attempting the pull without the right rig leads to dropped pumps, damaged casing, and stuck equipment. Our crew uses proper pulling equipment and the experience to do the work without subcontracting it out, which means a faster turnaround and a single point of accountability when something goes wrong.
Our Process
- Diagnose the issue and confirm pulling is required
- Disconnect power and prepare the wellhead
- Pull the pump and inspect the components on-site
- Recommend repair or replacement based on what we find
- Reinstall, pressure-test, and document the work
Why Choose Assure
- 20+ years of plumbing and well experience along the I-95 corridor
- In-house pulling equipment — no subcontractors
- Same-day diagnosis in most cases
- 280+ Google reviews and a 97% client satisfaction rate
- Transparent pricing and clear written diagnostics
Related Services
Call Today
If your well has stopped producing water or your pump is showing signs of failure, well pump pulling is usually the first step toward a real diagnosis. Contact us or call (540) 645-1351 — and rest assured we can fix it.
Here to help with some
Frequently Asked Questions
Can Assure pull and replace a well pump in one day?
In most cases, yes. We pull the pump, diagnose the failure on-site, and reinstall or replace it the same day, without subcontracting the work. That means faster water restoration and one team accountable for the result.
When does a well pump need to be pulled?
A pump needs to be pulled when testing points to a problem down the well, such as a failed motor, a damaged pipe or wire, or a worn pump. We test the above-ground components first, like the pressure switch, control box, and tank, so you don't pay for a pull you don't need.
What is well pump pulling?
Well pump pulling is the process of lifting a submersible pump, its pipe, and its wiring out of the well so it can be inspected, repaired, or replaced. It requires specialized equipment, especially on deep wells. Assure Plumbing & Septic pulls pumps from wells between 80 and 600 feet deep.